HRC60 Carbide 2 Flutes Standard Length Ball Nose End Mills

Tlhaloso e Khutšoanyane:

Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Helix Angle: 30 Degree.
Lisebelisoa tse tala: Sebelisa ZK40SF ka 12% Co content le 0.6um ea lijo-thollo
Ho roala: AlTiSiN, ka ho thatafala le botsitso ba mocheso li fihla ho 4000HV le 1200 ℃, ka ho latellana.
Mamello ea End Mill Diameter: 1 ＜ D≤6 -0.010 ～ -0.030;6 ＜ D≤10 -0.015 ～ -0.040;10 ＜ D≤20 -0.020 ～ -0.050 ～ -0.050
Likarolo tse ka Sehloohong:Moqapi oa lebanta la mahlakoreng a mabeli ka katleho o ntlafatsa ho tiea ha lebanta le bohale le qetello ea holim'a mosebetsi; Ho itšeha ho feta bohareng ho fokotsa ka katleho ho hanyetsa ho itšeha; groove e kholo ea ho tlosa li-chip, e bonolo ebile e boreleli ea ho tlosa chip le ho ntlafatsa ts'ebetso ea mochini; Moralo o habeli, o sebelisoang haholo ho groove le machining a lesoba.
Melemo: Moralo oa Spiral : Bokhoni bo boholo, ho tlosoa ha chip e boreleli, ha ho bonolo ho thibela. Theha ea ho itšeha e bohale ho fokotsa mocheso.
Carbide e entsoeng ka samente: Ho khetha lisebelisoa tsa 'mele tsa boleng bo holimo, ntlafatsa bophelo ba ts'ebeletso.
Litlhaloso tse fapaneng: Mefuta le setaele sa lihlahisoa li fapane ebile li fumaneha, haeba li le ngata, re ka thabela ho fana ka theolelo.
Re na le litlhaloso tse sa tšoaneng 'me re ka finyella litlhoko tsa mefuta e sa tšoaneng ea li-apertures.Rea u amohela ho romela litšoantšo tsa hau le lisampole, re ka li etsa ka mokhoa o ikhethileng.

Tlhaloso

Ntho NO.	Diameter D	Bolelele ba ho Seha	Shank Diameter	Kakaretso Bolelele	Flutes
MSKEM2FB001	3	6	3	50	2
MSKEM2FB002	1	2	4	50	2
MSKEM2FB003	1.5	3	4	50	2
MSKEM2FB004	2	4	4	50	2
MSKEM2FB005	2.5	5	4	50	2
MSKEM2FB006	3	6	4	50	2
MSKEM2FB007	4	8	4	50	2
MSKEM2FB008	5	10	5	50	2
MSKEM2FB009	6	12	6	50	2
MSKEM2FB010	8	16	8	60	2
MSKEM2FB011	10	20	10	75	2
MSKEM2FB012	12	24	12	75	2
MSKEM2FB013	14	28	14	100	2
MSKEM2FB014	16	32	16	100	2
MSKEM2FB015	18	36	18	100	2
MSKEM2FB016	20	40	20	100	2

E fetileng: HRC65 Blue Nano Cover 2 Flutes Ball Nose End Mills

E 'ngoe: HRC55 Carbide Micro-Diameter Ball Nose End Mill

Q1: Nka fuoa sampole bakeng sa tlhahlobo?
A: E, re ka tšehetsa sampole. Mohlala o tla lefisoa ka mokhoa o utloahalang ho ea ka lipuisano pakeng tsa rona.

Q2: Na nka eketsa logo ea ka mabokoseng / mabokoseng?
A: E, OEM le ODM lia fumaneha ho rona.

Q3: Melemo ea ho ba morekisi ke efe?
A: Tšireletso e khethehileng ea theolelo ea Lipapatso.

Q4: U ka laola boleng ba lihlahisoa joang?
K: E, re na le lienjineri tse itokiselitseng ho thusa bareki ba nang le mathata a tšehetso ea tekheniki, mathata afe kapa afe a ka hlahang nakong ea ho qotsa kapa ho kenya ts'ebetso, hammoho le tšehetso ea morao-rao. 100% itlhahloba pele u paka.

Q5: Na nka etela fektheri ea hau pele ho taelo?
A: Ehlile, amohela ketelo ea hau ea feme.